• 3 Posts
  • 61 Comments
Joined 10 months ago
cake
Cake day: August 29th, 2023

help-circle
  • I’ve been watching Majority Report with Sam Seder. Watched Breaking points since they were on the Rising with The Hill. Something just started to slowly change with them when they broke off. There’s the constant Ad’s (which is understandable, but was excessive), segments hidden behind a paywall, personalities started to change after surgery then Kyle Kulinski got heavily into the mix including romantically. I don’t know, just seemed the show started to take over the lives of the hosts, Sam and Emma have been a breathe of fresh air on Majority (even when Emma drinks a little too much lol). The show is their job and Sam is pretty professional, decent daily live show with clips of segments also being uploaded.




  • But either way, when you start, you just have to accept that something has a cause and effect.

    It is what it is, that’s the point I was trying to get across. People get held up on the why or how which is impossible to know without further studying because it’s not always intuitive to our perceived everyday experience.

    You know I didn’t really mean a “belief” right? Just the ability to let your mind sink in an experience or knowledge without first grasping the full concept “like ‘magic’”.



  • For me, it’s any community of Tradespeople. I can find relevant manufacturer and adjacent code regulations for modern equipment or building techniques anywhere online. The problem comes from obscure-ancient technology that was discontinued 60+ years ago, the only references to those are on Reddit and very specific forums.

    I recently ran into an electrical panel that was built in the 60’s and was promptly made illegal (split bus residential panel, no singular main disconnect switch). Even being trained and educated as an Electrical Engineer, it only gave me the ability to understand what the panel was doing, not the history and use cases of the past (since their use in residential applications is obsolete). I was able to find discussions between inspectors and electricians, how things played out with local authorities, and the on going debate of their practicality by actual professors discussing regulations and safety. I will miss these resources if they become unavailable at a future date (the whole enshitification process).

    That being said, places with higher than average traffic (like reddit now) tend to give a lot of crappy answers. Lot’s of diy’ers thinking their way is best (whether it’s code compliant or not), and others who don’t care about discussion and only want to say you’re doing it wrong because it’s not how they would do it (and nets them the highest profit margin on a job). There’s lots of owners out there that are probably afraid to ask a question now adays because of the responses (same linux community effect), even though the information around it could be important.


  • Cataphract@lemmy.mltoLemmy@lemmy.mlGoodbye Reddit, Hello Lemmy!
    link
    fedilink
    English
    arrow-up
    7
    arrow-down
    1
    ·
    1 month ago

    Eh, anything linked on Reddit has it’s own link on here in regards to News. I get news from multiple sources offline and on so putting up with Reddit’s negative aspects isn’t worth it for me. I also enjoy the discourse on here a lot more, Reddit responses seem more of a “bubble” than the entire Lemmy community you’re labeling.

    I’ll share 2 semi-recent posts I read as an example of why I’m on here instead of Reddit. Btw, both of these posts are about the same BBC article but obviously paint a completely different picture.


    Reddit : Crew trapped on Baltimore ship, seven weeks after bridge collapse

    Top 4 Comments (1387 total)

    • holy shit its been 7 weeks since that collapse? (13.4k upvotes)
    • Part of the ship, part of the crew! (4712 upvotes)
    • I think “stuck on the ship” is a better phrase. “Trapped” brings to mind being wedged under a fallen brace or something. (8388 upvotes)
    • So not trapped just maintaining the ship like they’re paid to do. (5756 upvotes)

    Lemmy: They detonated chunks of the bridge while sailors are on board because the US won’t allow them shoreside.

    Top 4 Comments (30 total)

    • This shit is extremely weird and happens all over. For some reason sailors are just absolutely not allowed off their shitty falling apart ships and have to stay on board even after the owners vanish and leave them hanging in the wind. There are sailors trapped in this situation in ports all over the world - the ships are too damaged to sail, or the owners vanished without paying port fees and the ship is impounded, or whatever. Weird shit. And all these sailors, mostly from global south countries, are trapped. The country they’re stuck in won’t let them off the ship, they have no way to pay for port fees or fuel and sometimes even food or water. It’s utterly fucking bizarre. I don’t think it’s a large number of ships in absolute terms, but it is common in the sense that at least a few ships are trapped in this limbo all the time. There’s this whole world of ultra-shady shipping with ships that are registered in sketchy tax haven countries, or have no registration, and they get abandoned all the time. And sailors in general just get treated like shit. A lot of sailors come from poor global south countries and get treated as disposable. Terrible conditions, bad or no support from the ship owners, if something goes wrong they can be stranded and totally fucked. It’s a mess, like a serious problem for workers. @Frank@hexbear.net
    • the FBI still has their seized phones and shit, so not only are they stuck on a damaged ship they might be unable to reach out to family and friends (not sure what the communication/internet situation is on a ship like that). @nat_turner_overdrive@hexbear.net
    • If you think this is wild you should read some stories about stowaways. I know a guy who sailed with a dude who had been a stowaway on danish ships for a couple decades, and that was a nice story. A lot of the stowaways get tortured and/or killed and then dumped in international waters. A stowaway is any person who is not on the ships’ manifest. Lot of refugees that just… disappear. Stowaways can be made to work while they’re on your ship, though you have to provide them lodgings and food. There’s a lot of people who get found on ships, are made to work and then are unable to leave the ship because no country will take them. Then they’re just stuck there forever. @Egon@hexbear.net
    • How the fuck is “you have to let people on cargo ships into your country at least temporarily” not in any of the treaties we have regarding international shipping? @ClimateChangeAnxiety@hexbear.net

    I just don’t have the time to read through 1300 joke comments to get to the 30 or so of actual discussions I’m interested in. The fact that the top comments are just arguing over terminology semantics used in a title (and not the conditions or situation these people were forced into) isn’t something I wish to waste my time on.

    If lemmy.ml gets to be like Reddit, I just have to move to a smaller instance and I’m done.





  • I was just worried someone might take it to heart without realizing the nuance lol. You or I may do well, but someone asking such a broad question like finding a partner probably doesn’t have that much social awareness (it’s been answered so many times and really all boils down to the individuals or specific situations like the scenarios we presented). I was just imagining a guy walking around in cargo shorts with socks and sandals awkwardly screaming “hi” at everyone with a pair of orange earplugs sticking out.



  • … So you’re at a concert, wandering around the crowd (with earplugs) just conspicuously sliding up to different spots and striking up conversations with attractive people while they’re enjoying the performance? I would emphasize you want something more like a festival where there are multiple events and people have down time in-between to socialize. A normal concert would be like wearing sunglasses to a theater and moving around to get “the best viewing spot” while talking to everyone which is creepy as hell and not a good setting to strike up an actual conversation.





  • Fiber is a sore subject lol, it was a big local deal when fiber was coming to town with newspaper articles and everything about the big development and how great everything was gonna be with the upgrade in speed. Lots of crews all over the county for months (maybe years? time is fickle) and even had them running the lines on my street and a relatives on the other side of the main town. Turns out they decided to not actually make fiber available for the area, it’s just running through. I understand you can’t just splice into fiber lol, still irks me I have a box I can’t touch or move with “Fiber” labelled on it sitting on the property though and have to deal with cable internet that runs like it’s a DSL connection.

    With wired Ethernet to every room, would something of this type of connection be aesthetically pleasing? I would like to bundle everything so there’s not an excessive amount of wall plates and others have suggested running two lines in parallel with STP cat6a (cat8 will probably be saved for the next place if it has fiber available). I’m just worried about the look of having several wall jacks or several unknown connections that might confuse someone (I will label everything but that only goes so far for understanding). If I include coaxial it might look a little like this style of outlet if I’m not running two ethernet ports. I’m starting to lean into the coaxial/single ethernet just because cable/satellite tv is still king around these parts and people love their boxes.

    If you had to have a modem box for internet with coaxial or DSL, would you prefer that tucked away into the server closet as well? or keep that in a separate area with the phone connections and just run an ethernet from the modem to the server closet where the router and switch setup are at?


  • The only problem with that is if you’re pumping air out you have to think about where the air is coming in from. Older fireplaces are notorious for this because any air escaping through the chimney has to be replaced usually resulting in the rest of the house becoming actually colder through air gaps/cracks. Newer built houses even have ductwork for controlled air introduction when using exhaust fans like the range hood over the stove to maintain relative pressures with energy efficient houses (this house is nowhere near that level yet, but once newer windows are installed and I can seal the outlets I replace/install it will be one step closer).

    One thought I did have is running the HVAC return through the area, it would reduce the relative humidity of the house as I’ve already installed several dehumidifiers for the closed crawl spaces I’ve sealed up and insulated but this whole geographical area is just horrible (/s about the servers being a dehumidifier, but realistically the equipment has to have some type of impact even if 1% lol) . Nearly every house I’ve worked on has some type of moisture issue but home owners typically don’t care unless it becomes life-threatening or threatens the structure. My thoughts on the return is so cold air isn’t directly blasted into the area as the dramatic temperature change might introduce condensation, the calculations for the CFM (airflow) have to be exact though so I’m not killing any systems early. The house has an old A/C system with an oil heating system (also has propane and electrical heating in other locations, idk if the person before me had a thing for collecting all the systems but it’s rather insane), the a/c doesn’t cover the entire structure though so I either have to think about replacing the entire setup (it is rather old but looks well maintained surprisingly) or milking the old system while installing a secondary hvac system for the unconditioned areas (mainly 2nd floor, plenty of attic space to install it which will probably be sealed as well if I do).

    You definitely hit on a great idea though, I was planning on installing a secondary thermostat in the server area. If I did a return through and set it to active the hvac system fan when a temperature threshold is reached, in the winter it would disperse the heat through the house and I wouldn’t have to worry about the system switching from A/C to Heat or how I would continue to cool an area now getting hot air directly pumped into it. Then in the summer the air returning would be directly cooled when necessary and released back into the house so I’m not worrying about another outside vent opening requiring filters that need to be replaced/inspected etc. Might be able to pull off the airflow requirements with something as simple as a slotted closet door a lot of bedrooms have. I would be concerned someone might replace the door one day without realizing it’s importance so maybe dedicated wall venting into the server area is safer, even if it looked worse.


  • Oh nice! I had home assistant on my radar from other open source threads I read but hadn’t run across the site link or realized they have smart hubs for sale with it. I’ve been hesitant with the automation setup because of the complications you mentioned. I imagined the high priced homes/condos with automated systems probably came with a subscription service for customer support with the equipment installed but wasn’t sure if that assumption was right. If I can pull the same thing off with an open source project that’s reliable and has custom equipment built for it then maybe it’s worth looking into after all.



  • cheep Chinese ip cameras that have poe and are blocked from the internet

    That’s a good point. I’ve been introduced to those systems with some installs and was avoiding anything that connected to a server not under my control even if it’s more complicated (completely wigs me out people are complacent with some unknown server recording EVERYTHING). I hadn’t looked into “dumbing” the cameras to take advantage of their lower price points, much like you can buy a smart tv but avoid it’s connectivity to use it more privately and without bloatware. Been sporadically searching security systems the past few weeks so I’ll have to double down and keep that perspective in mind.


  • and here I thought I was being excessive with thinking about conduit. There is a large unfinished basement that mostly everything in it was destroyed from a flood. After I ripped everything out, installed a new stairwell, and ran new drainage to avoid the next eventual flood (as all lower elevations like to do), I was pondering running conduit for everything to protect from moisture in that area for at the very least some high wall outlets to power systems down there. I could scale that plan back and not have everything being conduit (for cost sake) but install it in specific spots for anything that won’t have easy access in the future. I know of a few spots that will need new lines ran through 3 floors so the pull cables would come in handy for future use.