smartmontools has some good functionality for interfacing with SMART via usb bridges that do not provide native functionality.

Fair. No arduino kits though?

If you’re going to the expense of putting a camera on it, why not take it a little further and slap together an arduino-based sensor suite with some logging? See if you can find any correlations in temp/humidity/gas conc that might help with diagnosis.

1.2l water

240ml sodium sulfate

60ml sodium chloride

20ml xantham gum(optional for increased efficacy by keeping the solution homogenous)

Boil water, stir until fully dissolved, a small amount of solute should remain, if not, increase sodium sulfate concentration slowly until it does, indicating no free water molecules available for dissolution.

Solution should now be cooled to below 18c( freezing point) for an end product that will regulate temperature to 18c so long as it have sufficient(negative) thermal energy.

Solution of pure sodium chloride will have freezing point approx -20C, while solution of pure sodium sulfate has freezing point +35C. Adjusting the ratio of NaCl to Na2SO4 will shift the freezing point towards either end of thag spectrum, depending on what phase change temperature you are targetting.

I often stumble across jobs in Antarctica listed in my region. It’s right there in the headline, so its easy to skip over them, but i have to wonder, how else would you advertise for jobs in remote locations where most people wouldn’t even think to look?

90% of listings on aliexpress or amazon are made by dropshippers who don’t actually have any knowledge of the products they’re selling. They scrape the datasets for all of the manufacturers they source from, autopopulate any required fields and blast out a thousand listings. I’d wager the majority aren’t even human reviewed, let alone human written.

Boot into your bios and check the sata mode. A number of machines that I work with(acer predators most notoriously) will for no discernable reason switch from achi mode to rst optane, resulting in no drive being accessible to the os. Switching back to ahci resolves it.

I agree with you somewhat, but I think in the case of body parts, which require the death of a person to procure, the risk of encouraging such bad actors is significant enough that we ought not to enable any market at all except where lives may be saved by their procurement.

I would consider trophies derived from human bodies to be immoral in the same way that child pornography is. The act of transmitting a digital file does not directly cause harm to anyone, but by creating a demand for it, you are in turn driving an industry that violates the rights of people in order to keep supplying it.

For many years after western contact with Aotearoa, people were deliberately killed for the sake of producing preserved heads which would be purchased by collectors in Europe.

If there were to be a resurgence in demand for such objects, there is no shortage of people either desperate enough or cruel enough to revive the practice of killing people to produce them.

Sure, there could be systems put in place to verify that a head was procured humanely after natural death, but it would never be foolproof, and there would always be some degree of black market causing harm on the fringes in order to meet demand.

We already know that people are killed in order to feed the black market for transplantable organs, so why would we allow an industry with all of the same risks to exist purely for the sake of art?

My daughter is a very different skin colour than me. Somehow the worst I’ve encountered to date is an uppity mother who thought I was telling off a random child.

This is something I’ve never understood. Surely it is a compliment rather than an insult to effectively say “your partner is very attractive”

I’m sure if you hit the gym for a few months you’ll have the strength to win her back.

From a read of that article, it appears that they are feeding it analog inputs, which would imply that it is producing analog outputs. I don’t know if there is a way to evaluate floating point operations on an analog system. That said, my knowledge is very cursory, and someone will surely correct me.

This is actually how I do things when working on remote machines. I have far too many monitors, so dedicating on of them to a handful of btop/nvtop terminals works pretty well.

I admit that it’s a less than perfect setup though, and a single program which could handle the remote connections internally and display an aggregate would be nice.

I’ve never encountered that theory before. As far as my exposure has been, most opposition to 1080 is based around bykill; the effect of the poison on non-target species.

The scientific evidence suggests that the number of natives killed unintentionally by 1080 drops is more than compensated by the increased survival rates of those who now suffer less predation, but walk into any pub and you’ll find half a dozen people throwing out anecdotes about silent forests in the days after 1080 drops.

Swappable batteries resolve this issue pretty well. The energy density is far from comparable, but if you’re already hauling a van or trailer to the job site, then a dozen spare batteries isn’t an issue.

It is a very popular Single Board Computer, with a lot of community support that allows people to build and program a variety of things for a low price. Think of it like lego, but for things which can be useful as well as fun.

Want to run a weather station? Pi and a couple of off the shelf sensors, done.

Want to control your lights or appliances from your phone without getting out of bed? Pi and a couple of off the shelf relays, done.

Want to build a retro gaming console? Pi, a couple of off the shelf controllers and some pre-made emulators, done.

If it’s tp keep motorbikes out then it has failed anyway because it stops at the edge of the path, and leaves plenty of room to drive a motorbike around.

Says in the article that some generators are down for required maintenance “ahead of the winter”. Doesn’t specify which type of generation or whether the maintenance needs to be carried out specifically to prepare for winter conditions though.

It would be nice to have a bit more detail, maybe justification for why maintenance of electrical plant can’t be done at times of the year when demand is lower.

Are you sure you’re not confusing this with the concept of “binning”, which is a pretty standard practice for chips?

You manufacture to a single spec, expecting there to be defects, then you identify the defective units, group them by their maximum usability and sell the “defective” units as lower end chips. IE, everything with 24-31 functional cores gets the “extra” cores disabled and shipped as a 24 core, everything with 16-23 functional cores gets shipped as a 16 core, etc