• 1 Post
  • 39 Comments
Joined 1 year ago
cake
Cake day: June 14th, 2023

help-circle







  • TLDR: do memtest on your RAM

    I recently had an issue for quite some time where my computer would occasionally just hard crash. When it first started happening I tried many of the common tests including memcheck but found nothing. For a while it wasnt super common so I just lived through it. I thought it was an OS thing but it occurred on a different Linux distro and even on the ancient Windows 10 install I have but rarely use. I was just about to pull the trigger on replacing mobo and maybe even CPU+RAM. Before I did that I followed someone’s suggestion to do a mem test. I could have at least sworn that I already did that and it came clean but it was an easy enough test to run, so why not.

    Sure enough, found an error. I isolated the faulted DIMM, pulled it out and I haven’t had a crash since. Crazy since I’m all but certain I did both memtest from a Linux live iso and the Windows memory checking utility.

    In short, test your RAM. Do multiple passes. Maybe even just try swapping out single DIMMs and running on that for a reasonable ammount of time to see if you can isolate a culprit. It was my first thought when the issue first occurred because it’s usually what causes stuff like that. When the tests came up clean originally I assumed it had to be something else. I was wrong.


  • I think the KDE vs Gnome thing in general for a lot is familiarity, but I gotta say as a primarily Gnome user, I find Dolphin harder(or maybe less intuitive) to use. It’s not bad, and in a number of ways I would agree is absolutely superior to Nautilus, but for whatever reason, between the two, I generally would prefer Nautilus.



  • I primarily use logseq but have obsidian configured to use the same directory. I then use logseq for journaling and some tag notes that have searches and links kind of built in. Then I have obsidian for wiki or KB type notes. I can then link to parts of that in logseq. I also use obsidian for a few niche situations where the plugins add value. Its not a perfect solution but it works pretty well for me. I also typically use obsidian to folder directory organize my non journal notes, bit really you could just as easily use your file browser for that.






  • main thing to note is that NFS is an object based storage (acts like a share) where iSCSI is block based (acts like a disk). You’d really only use iSCSI for things like VM disks, 1:1 storage, etc. For home use cases unless you’re selfhosting (and probably even then) you’re likely gonna be better off with NFS.

    if you were to do iSCSI I would recommend its own VLAN. NFS technically should be isolated too, but I currently run NFS over my main VLAN, so do what ya gotta do





  • I actually use both Logseq and Obsidian. It’s not perfect, but Obsidian is more my knowledgebase and Logseq is my journal and sort of TODO manager. I have them all within the same directory so I can reference my knowledgebase, append to it, etc. from within logseq or the inverse. main issue is since logseq loves the bullet points it tends to whack out my headings and stuff in obsidian made notes


  • I’m a logseq user of about 6 months and overall really like it. It’s mostly built around the daily journal, which mostly works if you lean into it. I basically write what I did, todo’s or random thoughts for the day in there. I typically segregate my root bullet points into a handful of main “buckets” like a job, client or project. I used to do those with a hashtag like #job1 but moved to page tags like [[job1]] with sub bullets for main tasks, todos, notes, etc from each. i have many relevant hashtags for relevant subsystems/topics relating to the main ones.

    from there I have setup some basic pages for things like [[job1]] with a query to show TODOs with that task (see below), then some relevant reference notes, and sometimes some links to bullets from previous journals if i find i will likely reference them frequently. you also can see below the linked references, which is frequently useful. i also frequently put tags to other tags, pages, etc. within to help map everything together

    here’s an example of a very basic query I would keep at the top of the [[job1]] page {{query (and [[job1]] (task NOW LATER DOING IN-PROGRESS TODO WAIT WAITING))[[job1]]}}

    to your above, you have #workimprovements, you can either just jot those at the root as they come to you and include the full hashtag, or you could have a starting section of either [[workimprovements]] with various ideas below, but i would also suggest adding in other relevant hashtags for subtypes, areas, etc. another tip about hashtags, don’t go crazy with them – too many hashtags just makes a mess – but don’t skimp on them either. If you think you’ll use it frequently enough, or at least want to go back and reference it easily in the future, make a hashtag. you can use the hashtag plugin after the fact to find unused and remove hashtags you didn’t end up using.

    one thing I really wish they would add is similar to hashtags, but for people. Right now, I “tag” people with an @ in front of their name, so I might have @BobS requested X which sort of helps to go back and search for things related to @BobS, but it’s not natively done for fully fleshed out. It would be awesome if there was either native or a plugin functionality to more gracefully tie it together

    anyway, there’s my logseq ramble, hopefully it helps.