Tom's Hardware learned that candidates would oversee machines running 166 MHz processors with 8 MB of RAM, which are used to display important technical train data to...
Oh, everyone who ever travels by train in Europe will tell you that the German infrastructure is very much broken. You’re lucky if your delay is less than a day travelling through Germany.
Well I live in germany and therefore use the train network on short and long distance frequently and while it is unreliable, “a day” of delay is something I have never experienced.
Most of the delayed trains are late by less than one hour (still atrocious, but not a day’s worth by any means).
I actually experienced only once a situation where we were given the choice of a hotel or a continuation of our travels by taxi (which we chose) because the train we were in was late one hour or something and the other (last for the day) train could not wait.
Well, it’s based on experiences travelling through Germany proper - for example Denmark to France or Italy, including transfers. Often the delay will just be a couple of hours, but then you miss your transfer and you’re screwed.
Also if you’re on your way to Switzerland the Swiss have no patience for disruptions in their services, so if a train is delayed coming from Germany they’re likely to just not accept it into the country at all.
I have also heard from people who were told to spend the night in the train, which DB just parked in the outskirts of the city for the night. That way they could offer passengers a place to sleep in the cheapest possible ways. Pregnant women or families with young children were asked to check in to hotels.
Germany doesn’t really seem like a very efficient country, they still use fax for things and every person has to manage like 10,000 different insurances for everything. Seems like an old (and inaccurate) ww2 trope.
It’s mostly a misunderstanding of what is valued in German society. The common trope is that German society covets precision. This is not the case. German society covets unwavering precision in the adherence to norms. To the point where innovation is akin to revolution in the negative sense, and pigheadedness in procedure is considered a workplace virtue. In the mean time nothing gets done.
Source: expat in Germany.
No it’s just about moneymaking and education level. If you’re a foreigner and highly educated and get a good paying job like IT consultant or doctor, you’re an expat. If you’re low educated and get a low paying job like construction or factory or no job, you’re a migrant. One is liked more than the other, hence the difference they make. The first doesn’t speak local language, but does speak English, and few people care. The second doesn’t speak local language and no English and is disliked for it.How long you stay is not very relevant. AfD doesn’t hare expats as much as other migrants, for example…
I have no doubt their bureaucrats perform world-class efficiency in their handing out, filling in, faxing and archiving a sophisticated system of paper forms.
I guess it’s the trap of getting complacent and stopping modernizing as soon as you’ve convinced yourself you have the best system in the world.
It’s more that the bureaucracy is so complex and fragmented that it’s incredibly hard to digitalize. Lots of small fiefdoms that are entitled to make IT purchasing decisions themselves means paper is the only universal interchange format. In addition there is an unwillingness to change how things have always been done, or to simplify procedures. So there you have it: The German bureaucracy is too fat to move.
I work for german government agencies from time to time and they are working on it… It’s just really slow because there is so much of it, and due to organizational overhead. Also, there is not a single push for the entirety of Germany, but some things everyone does for themselves.
As an outside observation, Germans seem to make things better than they need to be in a detrimental way. For example, we redid one of our bathroom showers using the Schluter Kerdi waterpoofing system. They have very specific instructions on how to space the screws, how to seal the screws, how to seal the edges, how to mix the thinset, and probably some other things I can’t remember off the top of my head. They put it through a battery of tests, including going under 100’ of water. Who needs that? Don’t worry about it.
This stuff replaces cement board, which isn’t strictly waterproof, at least not on its own. It’s also significantly more expensive.
I do think it’s worthwhile for a home DIYer to get. The instructions are clear and it’s less likely you’ll screw something up that could result in disaster. That said, this thing is just waiting for a Japanese company to come along and make something 90% as good for 50% of the price. That’s basically what happened in the German vs Japanese car market, and there’s already some products on this market like that.
That’s another part of the infrastructure, though: We just don’t have enough rail as well as backup rolling stock.
And as the federation finally decided to spend some money it’s going to get worse in the next decade or so due to outages due to new constructions being linked up to the old stuff.
As to the age of the infrastructure – I mean it’s the railway. If a rarely-used branch line still uses mechanical interlocks and there’s no need to upgrade the capacity then the line is going to continue using infrastructure build in the times of the Kaiser. It’s not like those systems are unsafe, it just might be the case that unlike in the days of ole those posts with a gazillion levers aren’t manned all the time so you’ll see an operator drive to it with a car while the train is on its way. Which really isn’t that much of a deal when the branch line goes to a, what, quarry maybe sending out a train every two months or so. Certainly better than to demolish the line and use trucks instead.
Oh, everyone who ever travels by train in Europe will tell you that the German infrastructure is very much broken. You’re lucky if your delay is less than a day travelling through Germany.
Well I live in germany and therefore use the train network on short and long distance frequently and while it is unreliable, “a day” of delay is something I have never experienced.
Most of the delayed trains are late by less than one hour (still atrocious, but not a day’s worth by any means).
I actually experienced only once a situation where we were given the choice of a hotel or a continuation of our travels by taxi (which we chose) because the train we were in was late one hour or something and the other (last for the day) train could not wait.
Well, it’s based on experiences travelling through Germany proper - for example Denmark to France or Italy, including transfers. Often the delay will just be a couple of hours, but then you miss your transfer and you’re screwed.
Also if you’re on your way to Switzerland the Swiss have no patience for disruptions in their services, so if a train is delayed coming from Germany they’re likely to just not accept it into the country at all.
I have also heard from people who were told to spend the night in the train, which DB just parked in the outskirts of the city for the night. That way they could offer passengers a place to sleep in the cheapest possible ways. Pregnant women or families with young children were asked to check in to hotels.
Afaik Deutsche Bahn loses 5 mil a day: https://www.theguardian.com/business/2023/oct/14/its-the-same-daily-misery-germanys-terrible-trains-are-no-joke-for-a-nation-built-on-efficiency
Germany doesn’t really seem like a very efficient country, they still use fax for things and every person has to manage like 10,000 different insurances for everything. Seems like an old (and inaccurate) ww2 trope.
It’s mostly a misunderstanding of what is valued in German society. The common trope is that German society covets precision. This is not the case. German society covets unwavering precision in the adherence to norms. To the point where innovation is akin to revolution in the negative sense, and pigheadedness in procedure is considered a workplace virtue. In the mean time nothing gets done. Source: expat in Germany.
Is this the same as a migrant?
Yes, as long as they’re also white and middle/upper class!
No, the way it’s often used is closer to “posh guest worker”.
deleted by creator
Migrant implies the non permanent kind because a permanent migrant is referred to as an “immigrant”.
What’s the technical difference between a migrant and an expat?
I believe the difference is that an expat moved there non-permanently, while an immigrant moved there permanently
Though if I ever somehow became an expat, I wouldn’t use the word because of how people associate it.
Immigrant = Someone who has moved to another country permanently. Migrant = Someone who has moved to another country temporarily.
Expat is often used by western migrants who don’t like the word “migrant”.
I take issue with it because people classify an Indian doctor moved to the US as a migrant but an American doctor eho has moved to Europe is an expat.
Removed by mod
I did point out that I would not use the word myself, which was entirely for that reason.
Removed by mod
No it’s just about moneymaking and education level. If you’re a foreigner and highly educated and get a good paying job like IT consultant or doctor, you’re an expat. If you’re low educated and get a low paying job like construction or factory or no job, you’re a migrant. One is liked more than the other, hence the difference they make. The first doesn’t speak local language, but does speak English, and few people care. The second doesn’t speak local language and no English and is disliked for it.How long you stay is not very relevant. AfD doesn’t hare expats as much as other migrants, for example…
Also bureaucracy is through the roof in everything, i have no idea who the fuck thinks of germany as efficient.
I have no doubt their bureaucrats perform world-class efficiency in their handing out, filling in, faxing and archiving a sophisticated system of paper forms.
I guess it’s the trap of getting complacent and stopping modernizing as soon as you’ve convinced yourself you have the best system in the world.
It’s more that the bureaucracy is so complex and fragmented that it’s incredibly hard to digitalize. Lots of small fiefdoms that are entitled to make IT purchasing decisions themselves means paper is the only universal interchange format. In addition there is an unwillingness to change how things have always been done, or to simplify procedures. So there you have it: The German bureaucracy is too fat to move.
I work for german government agencies from time to time and they are working on it… It’s just really slow because there is so much of it, and due to organizational overhead. Also, there is not a single push for the entirety of Germany, but some things everyone does for themselves.
He’s actually German.
As an outside observation, Germans seem to make things better than they need to be in a detrimental way. For example, we redid one of our bathroom showers using the Schluter Kerdi waterpoofing system. They have very specific instructions on how to space the screws, how to seal the screws, how to seal the edges, how to mix the thinset, and probably some other things I can’t remember off the top of my head. They put it through a battery of tests, including going under 100’ of water. Who needs that? Don’t worry about it.
This stuff replaces cement board, which isn’t strictly waterproof, at least not on its own. It’s also significantly more expensive.
I do think it’s worthwhile for a home DIYer to get. The instructions are clear and it’s less likely you’ll screw something up that could result in disaster. That said, this thing is just waiting for a Japanese company to come along and make something 90% as good for 50% of the price. That’s basically what happened in the German vs Japanese car market, and there’s already some products on this market like that.
An old mechanic friend of mine used to say “German cars are over-engineered and under-designed”, lol.
Having worked on every brand of car out there, his description, and your explanation make a lot of sense together.
I’ve never seen such a clear and concise comparison of German/Japanese manufacturing, you really nailed it.
Both approaches have their place, the key is to know when to apply them.
German re-unification cost trillions. It’s entirely unsurprising.
That’s another part of the infrastructure, though: We just don’t have enough rail as well as backup rolling stock.
And as the federation finally decided to spend some money it’s going to get worse in the next decade or so due to outages due to new constructions being linked up to the old stuff.
As to the age of the infrastructure – I mean it’s the railway. If a rarely-used branch line still uses mechanical interlocks and there’s no need to upgrade the capacity then the line is going to continue using infrastructure build in the times of the Kaiser. It’s not like those systems are unsafe, it just might be the case that unlike in the days of ole those posts with a gazillion levers aren’t manned all the time so you’ll see an operator drive to it with a car while the train is on its way. Which really isn’t that much of a deal when the branch line goes to a, what, quarry maybe sending out a train every two months or so. Certainly better than to demolish the line and use trucks instead.